Finally got around to testing the whole system out with 200ft of ethernet cable and a teensy 4.0 https://hackaday.io/project/185775-neopi...

Improvements -Changed to a much cheaper SOIC-8 transceiver

Improvements -Fixed backwards VCC and GND labels -Fixed backwards A and B labels -made enough room for an optional SL connector behind...

Improvements -Reran the traces to the ethernet jacks to make it used the T-568B ethernet cable wiring -Added labels to the output...

Improvements -Reran the traces to the ethernet jacks to make it used the T-568B ethernet cable wiring -Added labels to the input channels...

Improvements -added cuttable trace to add a resistor on the signal line to reduce ringing -added spot for an optional inrush limiting...

based off of the original transceiver boards, now with a RJ45 plug!

These are used to break out connections from the 4 channels of a differential transmitter board to a single rj45 transceiver board with...

8 channel differential transmitter boards have been ordered These are for use with the selectable differential transceiver boards to...

Selectable differential transceiver boards have been ordered These will be able to be used in receive mode with the 8 channel...

2nd iteration of the neopixel breakout boards have been ordered Improvements -added solder mask -silkscreened labels -traces on both...